Introduction
LaserBurn PC software provides an easy way to control your Ray5 mini laser engraver and complete engraving projects from your computer.
With LaserBurn, you can connect your Ray5 mini, import engraving files, adjust engraving parameters, and start your project with simple steps.
This guide will walk you through how to use LaserBurn PC software with Ray5 mini, including software setup, device connection, file import, parameter adjustment, and the engraving process.
Steps
1. Software Download
First, go to the Longer official website to download the LaserBurn PC software. Install it and then open the software.
2. Device Connection
After opening the software, click "Device" to connect the machine. In the pop-up window, select the Ray5 mini image and click "Confirm". Then choose the correct port and click "Connect". When "Ray5 mini" appears in the device window, the connection is successful.
Import File and Start Engraving
Click the icon in the upper left corner and select "Import" to load the image to be engraved into the software. Then click the layer option and double-click the corresponding layer to modify the engraving parameters and confirm.
Before starting engraving, click "Reset" on the machine, then click "Engraving". Click "Border" to confirm the engraving position, and finally click "Start Engraving".
Conclusion
Using LaserBurn PC software with Ray5 mini is a simple way to complete laser engraving projects.
By following the steps above, you can successfully connect your device, import files, adjust engraving parameters, and start engraving.
Correct device connection, proper parameter settings, and accurate positioning will help improve engraving efficiency and achieve better results.
Share:
How to Get the Best LaserBurn Parameters Using the Material Library
Guide to Stone Engraving Using Longer Laser Engravers