Software

The Longer Ray5 laser engraver uses an MKS DLC32 mainboard with wireless connectivity, microSD card support, and a touchscreen interface. It also supports full remote control through the MKSLaser application on Android and iOS devices. MKSLaser allows users to...

In FDM 3D printing, print quality is affected by more than just nozzle temperature and printing speed. The way your printer moves also has a direct impact on the final result. Jerk calibration helps adjust how quickly the printer...

Introduction Many FDM 3D printer users want a more convenient way to manage and monitor their printing process. With OctoPrint, users can remotely control their printer, upload files, monitor printing progress, and expand functions through plugins. Normally, OctoPrint...

The Longer LK4 PRO and LK5 PRO are both popular FDM 3D printers with similar designs. While the LK5 PRO offers a larger printing area and several hardware improvements, LK4 PRO users can also upgrade their machines with some...

Turning a simple 2D image into a printable 3D model is one of the easiest ways to start exploring creative 3D printing. With the help of image conversion tools, photos, logos, and artwork can be transformed into 3D...

Laser engraving technology has become increasingly popular among makers, DIY enthusiasts, and small businesses. From personalized gifts to creative projects, laser engravers provide an efficient way to transform digital designs into physical products. To better understand how a...

If you're using a laser engraver or other digital fabrication tools, you'll often need to convert a 3D model into a 2D image before engraving. Most laser engraving software works with flat image formats such as PNG, JPG,...

In 3D printing, the nozzle diameter plays a key role in determining the maximum layer height you can use. As a general rule, the maximum layer height is about 80% of the nozzle’s diameter.

In 3D printing, proper extrusion flow calibration is important for achieving accurate dimensions and better surface quality. If the flow value is too high or too low, the printed model may have problems such as gaps, excess material,...