Software

Connecting your Nano series laser engraver to the correct software through USB is the first step toward reliable communication and successful engraving. Whether you're using LaserGRBL, LightBurn, or LaserBurn Desktop, selecting the correct COM port and configuring the connection properly...

Engraving transparent glass requires a few additional preparation steps to help the laser mark the surface effectively. With the LONGER Ray5 Mini or Ray5 MiniS, a rotary attachment, and LightBurn, you can create clean engravings on glass cups...

Introduction Before using LaserGRBL with a LONGER Nano or Nano Pro laser engraver, you need to import the correct configuration file to enable the required control functions. The LaserGRBL configuration file adds custom buttons to the software interface...

Image engraving quality depends on more than just the laser engraver. Preparing the image correctly and choosing the right LaserGRBL settings can make a noticeable difference in the final result. This guide covers the basic image preparation steps, import...

Importing the correct configuration file is an important step when setting up your laser engraver in LightBurn. The correct .lbdev file allows the software to recognize your machine and apply the proper device settings. This guide explains how...

If LightBurn cannot connect to your laser engraver over Wi-Fi, the problem is usually related to the network settings, IP address, port configuration, or your computer. This guide walks you through the most common checks to help identify...

To use the Ray5 miniS laser engraver with LightBurn, you need to correctly install the device configuration, USB driver, and establish a stable USB connection between the machine and the software. This guide explains how to connect the...

Connecting your Ray5 Mini laser engraver to LaserGRBL via Wi-Fi allows for a more flexible and efficient workflow by eliminating the need for a constant USB connection. The RAY5 Mini supports two wireless connection modes: AP mode and STA...

A stable WIFI connection between the LaserBurn APP and your LONGER laser cutter and engraver ensures smooth wireless control, easy parameter adjustments, and a more efficient engraving workflow. If your LaserBurn APP cannot detect or connect to your...