LONGER ePrint Light Painting Kit Quick Start Guide

Welcome to the Longer ePrint Light Painting Kit user guide.

This guide is designed for beginners and explains how to assemble, print, and use the light painting product step by step. By following the instructions carefully, you can create a decorative light frame with clear patterns and vivid lighting effects.

Before starting, please read this guide carefully to understand the material handling, operation steps, and safety precautions. Proper operation can help avoid common issues and ensure safe use.

Important Safety Tips

• Operate in a dry and dust-free environment.
• Avoid moisture and dust affecting the circuit and product performance.
• Store unused materials in a sealed container away from direct light.
• Keep the product away from water and humid environments.
• Do not disassemble the circuit or light source components unless you are a professional.

Product Components

Before assembly, prepare the following components:

1. Transparent Acrylic Panel
   1mm thick, 15 × 20 cm acrylic panel with protective film.
2. Reflective Film
   15 × 20 cm white reflective film.
3. Light Painting Photo Frame
   Photo frame with built-in light source and charging port.

Light Painting Assembly and Printing Process

Step 1: Prepare the Acrylic Panel

1. Remove the double-sided protective film from the transparent acrylic panel.
2. Check both acrylic panels to ensure they are clean, transparent, and free from defects.

The final material structure should be: Acrylic Panel + Reflective Film + Acrylic Panel

Step 2: Install the Composite Material

1. Confirm the front side of the acrylic panel is the reflective transparent surface.
2. Insert the assembled material into the photo frame from the side.

Step 3: Prepare the Printing File

1. Confirm the printing file and upload it.
2. Check the printed image.

Important:

• Mirror the image before printing.
• Confirm the correct printing position.

Step 4: Configure Printing Settings

• Set the image parameters, Quality: High, Speed: High
• Set the printing mode: Flat
• Set the ink mode: CMYK

Step 5: Print on the Acrylic Panel

1. Place a transparent acrylic panel on the printing platform.
2. Confirm the printing position.
3. Start printing.

After printing:

• Check the pattern position.
• Make sure the printhead does not collide with the material.

Step 6: Check Printing Quality and Assemble the Product

After printing:

1. Check pattern clarity and surface curing condition.
2. Combine the printed acrylic panel with the other materials.
3. Install the assembled material into the photo frame.

Important:

• The ink layer should face the inner side of the photo frame.

Step 7: Turn On the Light Painting Frame

In a dark environment, turn on the light. The photo frame will illuminate, making the printed pattern appear brighter and more vivid.

Light Painting Troubleshooting Guide

Conclusion

The Longer ePrint Light Painting Kit combines printing, acrylic materials, and lighting effects to create decorative illuminated artwork.

Follow the correct assembly and printing steps, keep the materials clean, and use the product in a suitable environment to achieve better results and maintain stable performance.