Blog Articles

The LONGER Ray5 miniS laser engraver supports Wi-Fi connection with LightBurn, allowing users to control the machine wirelessly without using a USB cable. Ray5 miniS provides two Wi-Fi connection modes: AP Mode: The computer connects directly to the...

Engraving transparent glass requires a few additional preparation steps to help the laser mark the surface effectively. With the LONGER Ray5 Mini or Ray5 MiniS, a rotary attachment, and LightBurn, you can create clean engravings on glass cups...

Image engraving quality depends on more than just the laser engraver. Preparing the image correctly and choosing the right LaserGRBL settings can make a noticeable difference in the final result. This guide covers the basic image preparation steps, import...

If LightBurn cannot connect to your laser engraver over Wi-Fi, the problem is usually related to the network settings, IP address, port configuration, or your computer. This guide walks you through the most common checks to help identify...

To use the Ray5 miniS laser engraver with LightBurn, you need to correctly install the device configuration, USB driver, and establish a stable USB connection between the machine and the software. This guide explains how to connect the...

Connecting your Ray5 Mini laser engraver to LaserGRBL via Wi-Fi allows for a more flexible and efficient workflow by eliminating the need for a constant USB connection. The RAY5 Mini supports two wireless connection modes: AP mode and STA...

A stable WIFI connection between the LaserBurn APP and your LONGER laser cutter and engraver ensures smooth wireless control, easy parameter adjustments, and a more efficient engraving workflow. If your LaserBurn APP cannot detect or connect to your...

LightBurn is one of the most popular laser engraving and cutting software solutions for hobbyists, makers, and professional users. It provides powerful design tools, layer management, path optimization, and machine control features for compatible laser engravers. Choosing the correct...

If you're using a LONGER Ray5 miniS laser engraver with LightBurn, importing the correct .lbdev configuration file is one of the first and most important setup steps. Without the proper device profile, LightBurn may not communicate with your...