How to Print with the Longer Studio App for ePrint

The Longer Studio App provides a simple workflow for creating designs and managing print jobs with ePrint printers. Before starting a print task, make sure the printer is powered on and properly connected to the app.

After the connection is successful, the app will automatically switch to the homepage. Follow the steps below to complete your printing process.

Before printing, check the following:

1. Confirm the printer status, including ink level, printhead condition, and platform cleanliness.
2. Place the material flat on the platform and make sure there are no wrinkles or raised edges.

1. Enter the New Design Page

Tap “New Design” to enter the canvas page.

The system will automatically detect the connected printer model and platform configuration.

2. Add or Create a Design

In the canvas, import or create the design file you want to print. You can add designs in different ways, such as:

• Uploading local images through the upload function.
• Selecting preset elements through the preset elements function.

After adding the design, tap the corresponding layer to continue editing.

3. Adjust Layer and Output Settings

Enter the layer list and tap the selected layer to open the mode and output settings interface. You can select the required printing options and adjust related parameters, including:

• Print Mode
• Ink Mode
• White RIP Mode
• Varnish RIP Mode
• Print Copies

Make sure the settings match your printing requirements before continuing.

4. Enter Pre-Print Confirmation and Start Printing

Tap “Next” in the upper-right corner to enter the Pre-Print Confirmation interface.

After confirming the print settings, press the start button on the printer. The machine will begin executing the print job.

5. Monitor the Printing Process

After printing starts, you can check the real-time printer status through the software interface. The app allows you to view:

• Print progress
• Ink consumption
• Device operating status

You can also pause or stop the current print job when needed.

6. Complete the Print Job

Wait until the print job is complete, then remove the finished product from the printer. 

Check the final print result to confirm that the output meets your requirements.

Conclusion

The Longer Studio App simplifies the printing workflow for ePrint printers, from design creation and parameter adjustment to print monitoring. By following these steps, users can efficiently prepare designs, configure print settings, and complete printing tasks with greater convenience.