I am very satisfied with the Longer Nano.

So far so good very easy to use I m glad to choose longer for my first laser engraving machine ??

I'm getting ready to laser wooden beer mugs for my college buddies. It has worked great so far.

Love it and great customer service

Dispite the smal work area (10x10cm) it's very suitable for small pieces like keychain, papercard, businesscards and further more.
What I missed was a honeycomb that fits the surface. I made one myself (DIY).
It's a shame that the holes and the laser are not aligned. When you frame 10x10 its a little tilted. I fixed that with a plate thats fit the holes and then engrave a grid on it (so the grid is also tilted) Perfect for alignement.
When you cut, it's important to know that the further to the side of the workarea, the more slanted are the cutlines. For tabs and slots not so interesting :)
A necessary step before engrave, is run the macro for Switch carving mode. A totally new step to remember. Also when you use the rotary or the sliding table, you need to run a macro AND change some settings AND setup the rotary settings. I think this could be in a different way. Other brands have just the rotary setup.
For now, after 2 weeks of use, I am very happy with what this Nano Pro 12w can do.
Bought the Nano Pro 12w aspecially to take it with me to fairs to do custom engravings on the spot

Spectacular Laser !!! ??????????

Keep testing this amazing tool.

Finally getting the hang of this. Really nice machine!

Made a tag of the nieces dog for her school bag need to do some more testing to try get a better result and done some testing on the black aluminium cards for some waters bottles once the rotary arrives pretty happy with the nano for a first laser to play with

Made these by Nano Pro as replacements for two different friends who had their bracelets damaged.

A test on stainless steel with Nano Pro.The result is fantastic.

Pro tip, mix a teaspoon of borax with 1/3-1/2 cup of hot water and mix, spray or wipe onto the wood that you want to engrave onto and it will come out clean and dark with just one pass!

Yup that??s an engraved macaroon! Did quite a few on the longer nano pro just now!

Little experimentation with my 6w nano today?? engraving on pin wood and plywood.

Yay! My new tumbler!

As I continue to do some custom tees for our local high school team, I was impressed that the nano pro could burn the logo so small and remain recognizeable.

I got a 100 mm square heat sink from Amazon to use as a cutting platform and 3d printed a holder to keep stationary. Gave it a test run this morning, happy with the result. I would still like to add corner to it, but the framing works fine for one off stuff.

Thanks to Rita Rose once again for the assistance. And the dine folks at Longer Global for the effort that went in to this device.
Aupport has also been above and beyond.
Glass engraving, way easier than expected.
100 % Power
3000 Speed
Tempra paint applied with foam brush and allowed to dry.

I love its portable and can be connected via WiFi. Customer service is good.

Customer service was great when I had an issue with mine. So far I've really enjoyed my laser. It does well with intricate designs.

Schnelle Lieferung, einfacher Aufbau - nach 2 bis 3 mal ben perfekte Ergebnisse

i am in the early stages of using it. Appears to be well made and relatively simple to use so far as its mirror based and not frame based. Can't wait to unlock its full potential

Truly a unique unit that makes it easier to make and create with laser. Coming from a homemade laser to Nano Pro 12w is a oneway trip. Absolutely worth it!