3D打印机加热床PEI片材
采用优质弹性钢材制成。PEI板牢固地吸附在磁性底座上，可在260℃喷嘴的高温下正常工作。柔软的磁性贴纸弯曲后不会变形，并能承受100℃高温加热床的长期使用。
无需胶带或胶水即可轻松将耗材粘附到打印床上。打印件也很容易取下；只需取出PEI板并反复轻微弯曲即可立即取下打印件。
PEI打印面兼容PLA、PETG、PEEK、ABS以及任何其他耗材。
安装简便；只需将底部粘胶面贴在未加热的打印床上即可。PEI片材可通过磁性吸附与磁性贴纸粘合。
如果磁性贴纸粘在打印床上，就不容易取下来。因此，请务必先正确测量尺寸，然后再撕下背胶并将其粘贴到加热的3D打印机打印床上。
适用机型： 235mm*235mm（9.25*9.25英寸）适用于LK4、LK4 PRO、U30等；310mm*310mm（12.20*12.20英寸）适用于LK5 PRO、LK1、U20 PRO等。
包裹清单： PEI膜，磁性贴纸
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
常见问题解答
Use this text to answer questions in as much detail as possible for your customers.
-
联系我们
Use this text to answer questions in as much detail as possible for your customers.
